Palfinger Loader Cranes
Notice: Undefined variable: out in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 281
Notice: Undefined property: stdClass::$unit in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 305
Notice: Undefined property: stdClass::$unit in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 305
Notice: Undefined property: stdClass::$unit in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 305
Notice: Undefined property: stdClass::$unit in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 305
PK 9.501 SLD 5
INTELLIGENT LIGHTWEIGHT DESIGN OFFERS AN OPTIMIZED MOUNTING CONCEPT
- Shorter load cycle times due to High Speed extension
- High operator friendliness thanks to radio remote control
- Maximum utilisation of the working range due to HPSC
- More lifting power due to A-HPLS
Brochures
PK 8.501 SLD 1 | PK 9.001 SLD 3 | PK 8.501 SLD 3 | PK 9.501 SLD 5
| Max. lifting moment | 9.0 |
| Max. lifting capacity | 5700 |
| Max. hydraulic outreach | 11.8 |
| Max. manual outreach | 15.8 |
| Slewing angle | 400° |
| Slewing torque | 1.0 |
| Stabilizer spread (std) | 3.2 m |
| Fitting space required (std) | 0.72 |
| Width folded | 2.32 |
| Max. operating pressure | 360 |
| Pump capacity | 40 - 50 l/min |
| Dead weight (std.) | 1080 |
Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.
 Lifting moment |  Outreach |  Slewing angle |  Slewing torque (mt) |  Pressure |  Pump capacity (l/min) |  Crane Weight |  Crane Height |  Crane Width |  Installation Width | Max stroke lenght | Max lifting capacity | Load vertical | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Std | 9.0 mt | 5.6 m | 400 | 1.0 | 36.0 Mpa | 40-50 | 1080 kg | 2005 mm | 2300 mm | 720 mm | 5400 mm | - | 1660 kg |
| A | 8.7 mt | 7.6 m | 400 | 1.0 | 36.0 Mpa | 40-50 | 1170 kg | 2005 mm | 2300 mm | 720 mm | 7400 mm | - | 1140 kg |
| B | 8.5 mt | 9.7 m | 400 | 1.0 | 36.0 Mpa | 40-50 | 1270 kg | 2005 mm | 2300 mm | 720 mm | 9600 mm | - | 810 kg |
| C | 8.3 mt | 11.8 m | 400 | 1.0 | 36.0 Mpa | 40-50 | 1350 kg | 2005 mm | 2300 mm | 720 mm | 11700 mm | - | 570 kg |
The outreaches stated are with a boom angle of 20° and are therefore not the maximum. When using mechanical boom extensions, the loads shown on the charts need to be reduced by the weight of these extensions.
